|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Top View LEDs 67-11/W1C-GP2R1B2Z/2T Features Fluorescence Type High Luminous Intensity High Efficiency Esd protection Pb-free. The product itself will remain within RoHS compliant version. Descriptions The white LED which was fabricated using a blue LED and a phosphor, and the phosphor is excited by blue light and emits yellow fluorescence. The mixture of blue light and yellow light results in a white emission. Applications OA Equipment Backlighting of Full Color LCD Automotive Equipment Replacement of Conventional Light Bulbs and Fluorescent Lamps Device Selection Guide Chip Emitted Color Material InGaN White Water Clear Resin Color Everlight Electronics Co., Ltd. Device No. : DSE-671-273 http://www.everlight.com Prepared Date:25-Apr-2007 Rev. 1 Page: 1 of 11 Prepared by:Teresa EVERLIGHT ELECTRONICS CO.,LTD. 67-11/W1C-GP2R1B2Z/2T Package Dimensions Note: The tolerances unless mentioned is O 0.1mm ,Unit = mm Everlight Electronics Co., Ltd. Device No. : DSE-671-273 http://www.everlight.com Prepared Date:25-Apr-2007 Rev. 1 Page: 2 of 11 Prepared by:Teresa EVERLIGHT ELECTRONICS CO.,LTD. 67-11/W1C-GP2R1B2Z/2T Absolute Maximum Ratings (Ta=25J Parameter Reverse Voltage Forward Current Peak Forward Current (Duty 1/10 @1KHz) Power Dissipation Operating Temperature Storage Temperature Electrostatic Discharge(HBM) Soldering Temperature ) Symbol VR IF IFP Pd Topr Tstg ESD Tsol Hand Soldering : 350 J for 3 sec. Rating 5 25 100 110 -40 ~ +85 -40 ~ +90 2000 Reflow Soldering : 260 J J V for 10 sec. Unit V mA mA mW J Electro-Optical Characteristics (Ta=25J Parameter Luminous Intensity Forward Voltage Viewing Angle Symbol IV VF 2c 1/2 Min. 140 2.80 ----- ) Typ. --------120 Max. 285 3.60 ----Units mcd V deg Condition IF=10mA IF=10mA IF=10mA Notes: 1.Tolerance of Luminous Intensity O 11% 2.Tolerance of Forward Voltage O 0.1V Everlight Electronics Co., Ltd. Device No. : DSE-671-273 http://www.everlight.com Prepared Date:25-Apr-2007 Rev. 1 Page: 3 of 11 Prepared by:Teresa EVERLIGHT ELECTRONICS CO.,LTD. 67-11/W1C-GP2R1B2Z/2T Bin Range Of Luminous Intensity Bin Code R2 S1 S2 Min. 140 180 225 Max. 180 225 285 mcd IF=10mA Unit Condition Bin Range Of Forward Voltage Group Bin Code 35 36 37 G 38 39 40 41 42 Min. 2.80 2.90 3.00 3.10 3.20 3.30 3.40 3.50 Max. 2.90 3.00 3.10 3.20 3.30 3.40 3.50 3.60 V IF=10mA Unit Condition Notes: 1.Tolerance of Luminous Intensity O 11% 2.Tolerance of Forward Voltage O 0.1V Everlight Electronics Co., Ltd. Device No. : DSE-671-273 http://www.everlight.com Prepared Date:25-Apr-2007 Rev. 1 Page: 4 of 11 Prepared by:Teresa EVERLIGHT ELECTRONICS CO.,LTD. 67-11/W1C-GP2R1B2Z/2T Color Rank (IF=10mA) Group Bin Code CIE-x 0.296 0.287 CIE-y 0.276 0.295 0.315 0.294 0.294 0.315 0.339 0.318 B5 0.307 0.311 G 0.311 0.307 B6 0.330 0.330 *The C.I.E. 1931 chromaticity diagram ( Tolerance O 0.01) CIE Chromaticity Diagram 0.34 0.33 0.32 0.31 B6 Y 0.30 B5 0.29 0.28 0.27 0.28 0.30 0.32 0.34 X Everlight Electronics Co., Ltd. Device No. : DSE-671-273 http://www.everlight.com Prepared Date:25-Apr-2007 Rev. 1 Page: 5 of 11 Prepared by:Teresa EVERLIGHT ELECTRONICS CO.,LTD. 67-11/W1C-GP2R1B2Z/2T Typical Electro-Optical Characteristics Curves Everlight Electronics Co., Ltd. Device No. : DSE-671-273 http://www.everlight.com Prepared Date:25-Apr-2007 Rev. 1 Page: 6 of 11 Prepared by:Teresa EVERLIGHT ELECTRONICS CO.,LTD. 67-11/W1C-GP2R1B2Z/2T Label explanation CAT: Luminous Intensity Rank HUE: Chromaticity Coordinates REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is O 0.1mm ,Unit = mm Everlight Electronics Co., Ltd. Device No. : DSE-671-273 http://www.everlight.com Prepared Date:25-Apr-2007 Rev. 1 Page: 7 of 11 Prepared by:Teresa EVERLIGHT ELECTRONICS CO.,LTD. 67-11/W1C-GP2R1B2Z/2T Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel. Note: The tolerances unless mentioned is O 0.1mm ,Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. Device No. : DSE-671-273 http://www.everlight.com Prepared Date:25-Apr-2007 Rev. 1 Page: 8 of 11 Prepared by:Teresa EVERLIGHT ELECTRONICS CO.,LTD. 67-11/W1C-GP2R1B2Z/2T Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence levelG 90% LTPDG 10% No. 1 Items Reflow Soldering Test Condition Temp. : 260JO 5J Min. 5sec. H : +100J 15min i 5 min L : -40J 15min H : +100J 5min i 10 sec L : -10J 5min Temp. : 100J Temp. : -40J IF = 20 mA 85J / 85%RH Test Sample Ac/Re Hours/Cycles Size 6 min 22 PCS. 0/1 2 Temperature Cycle 300 Cycles 22 PCS. 0/1 3 Thermal Shock High Temperature Storage Low Temperature Storage DC Operating Life High Temperature / High Humidity 300 Cycles 22 PCS. 0/1 4 5 6 7 1000 Hrs. 1000 Hrs. 1000 Hrs. 1000 Hrs. 22 PCS. 22 PCS. 22 PCS. 22 PCS. 0/1 0/1 0/1 0/1 Everlight Electronics Co., Ltd. Device No. : DSE-671-273 http://www.everlight.com Prepared Date:25-Apr-2007 Rev. 1 Page: 9 of 11 Prepared by:Teresa EVERLIGHT ELECTRONICS CO.,LTD. 67-11/W1C-GP2R1B2Z/2T Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package, the LEDs should be kept at 30J or less and 90%RH or less. or less and 60% RH or less. 2.3 After opening the package: The LED's floor life is 1 year under t 30J If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60O 5J 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 C / Sec. 260C. Max. 10 Sec. Max. 1~5 C / Sec. Pre-heating 180~200C for 24 hours. 60 Sec. Max. Above 220C 120 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350J for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Everlight Electronics Co., Ltd. Device No. : DSE-671-273 http://www.everlight.com Prepared Date:25-Apr-2007 Rev. 1 Page: 10 of 11 Prepared by:Teresa EVERLIGHT ELECTRONICS CO.,LTD. 67-11/W1C-GP2R1B2Z/2T 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. Device No. : DSE-671-273 http://www.everlight.com Prepared Date:25-Apr-2007 Rev. 1 Page: 11 of 11 Prepared by:Teresa |
Price & Availability of 67-11-W1C-GP2R1B2Z-2T |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |